ICS Diamond Tools

695XL PG Gas Power Cutter for Pipe Cutting
Deepest, Most Versatile Gas Power Cutter

Description

The new 695XL features an easy-to-start engine with a higher energy ignition system and durable, long-lasting components including a new muffler, carburetor, and piston and cylinder.

Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas power cutter for frequent-use by general construction, utility contractors, and concrete professionals.

Available with 12 in. (30 cm), 16 in. (40cm) guide bars and the entire line of FORCE3®, FORCE4®, and PowerGrit®Series diamond chains.

WARNING:
This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

695XL Powerhead only MSRP $2406
695XL GC Saw packages start at MSRP $3081
Click below to purchase or to see other packages.

FEATURES AND BENEFITS

  • Use on concrete, stone, masonry, ductile iron pipe, cast iron pipe, and more
  • Most versatile gas power cutter
  • New piston and cylinder lowers engine temperature
  • Better operator control
  • Longer life muffler with reinforced internal baffle
  • Easy-to-start with higher energy ignition system
  • New easy-to-tune carburetor

Engine Type 2-Stroke, Air Cooled
Displacement 94cc (5.7 cu-in)
Horsepower 4.8kW (6.4 hp) @ 9000 rpm
Torque 5.7 Nm (50.4 in-lbs) @ 7200 rpm
Engine Speed 9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle)
Chain Speed at Maximum Power 28 m/s (5500 ft /min)
Weight 9.5 kg (21 lbs) powerhead only
Dimensions 46cm (18") L x 36cm (14") H x 30cm (12") W
Starter Recoil, dust, and water-resistant
Ignition Special water-resistant electronic ignition
Fuel ratio 2% (50:1) gasoline-to-oil
Fuel Capacity 1 liter (0.26 gallon)
Water Supply Requirement Minimum: 1.5 bar (20 psi)
Water Flow Requirement Minimum: 1.5 bar (20 psi)
Guaranteed Sound Power Level, Lwa (1) 115 dB(A); (Kwa=1.0 dB(A))
Equivalent Sound Pressure at the Operator's Ear Lwa 104.6 dB(A) (K=1.0 dB(A))
Vibration, ahv eq Concrete Cutting (2) 3.6 m/s2 (K=1.0 m/s2) Front Handle/3.1 m/s2 (K=1.0 m/s2) Rear Handle
Vibration, ahv eq Pipe Cutting (2) 5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle

(1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010/(2) Measured in accordance with ISO5349-1:2001, ISO22867:2011 and ISO19432:2012

Product Support

Get help with troubleshooting and service issues.

Find Support

Product Registration

Activate your warranty and get premium support and more.

Register a Product

Featured Videos

695 Air Filter and Spark Plug

Replacing these two inexpensive items regularly can extend the life of your saw. Click below for instructions

695 and 890 Post Use Recommendations

You’re done for the day, we show you how put your tools away clean and ready for tomorrow

695 Daily Inspection

How to inspect the 695 daily to get the best life out of your saw

Also Available

2-Stroke Engine Oil

View Product

3P8 HF Wire Saw

View Product

680ES Gas Power Cutter

View Product