ICS Diamond Tools

890PG Hydraulic Power Cutter for Pipe Cutting

Description

If you’re looking for the highest level of performance and cutting capability, look no further.

The 890PG Hydraulic Power Cutter for pipe offers cutting depths up to 25 inches in ductile iron, cast iron, PVC, HDPE, and Insituform lining.

The deep cutting ability of the 890PG with PowerGrit® utility chain, allows the operator to make a single cut from one side so that less excavation is required.

The 890PG is also capable of operating the full-line of 890F4 FORCE4® concrete cutting chains, which allows you to use the power cutter across multiple applications (i.e., masonry, stone, reinforced concrete, or utility pipe).

WARNING:
This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

890F4 8gpm Powerhead starts at MSRP $4276
Click below to purchase or to see other packages.

FEATURES AND BENEFITS

  • Designed for heavy use
  • Also operates ProFORCE™ chain
  • Increased safety
  • Better operator control
  • Reduced excavation
  • Better access
  • Versatility

8 GPM

Weight 27.3 lbs (12.4 kg) with 15 in (38 cm) bar and chain
Bar Length Up to 25 in (63 cm)
Motor Speed 6100 rpm
Powerhead Dimensions 23 in (58.5 cm) length; 10.5 in (26.5 cm) height; 9.5 in (24 cm) width
Torque 122 in-lbs (13.8 Nm)
Horsepower 6 hp (4.6 kW)
Hydraulic Supply 8 gpm (30 lpm), 2500 psi (172.5 bar)
Noise Level 98 dB @ 3 ft (1 m) (Sound pressure level); 107 dB @ 3 ft (1m) (Sound power level)
Vibration Level 2.0 m/second2 (front handle); 6.0 m/second2 (rear handle)
Water Supply Minimum 20 psi (1.5 bar)

12 GPM

Weight 27.3 lbs (12.4 kg) with 15-inch (38 cm) bar and chain
Bar Length Up to 25 in (63 cm)
Motor Speed 6500 rpm
Powerhead Dimensions 23 in (58.5 cm) length; 10.5 in (26.5 cm) height; 9.5 in (24 cm) width
Torque 170 in-lbs (19.2 Nm)
Horsepower 8 hp (6 kW)
Hydraulic Supply 12 gpm (45 lpm), 2500 psi (172.5 bar)
Noise Level 98 dB @ 3 ft (1 m) (Sound pressure level); 107 dB @ 3 ft (1m) (Sound power level)
Vibration Level 2.0 m/second2 (front handle); 6.0 m/second2 (rear handle)
Water Supply Minimum 20 psi (1.5 bar)

* Product data shown is rated based on maximum input conditions and efficiency assumptions and may vary dependent on power supply.

Product Support

Get help with troubleshooting and service issues.

Find Support

Product Registration

Activate your warranty and get premium support and more.

Register a Product

Featured Videos

695 Air Filter and Spark Plug

Replacing these two inexpensive items regularly can extend the life of your saw. Click below for instructions

695 and 890 Post Use Recommendations

You’re done for the day, we show you how put your tools away clean and ready for tomorrow

695 Daily Inspection

How to inspect the 695 daily to get the best life out of your saw

Also Available

2-Stroke Engine Oil

View Product

3P8 HF Wire Saw

View Product

680ES Gas Power Cutter

View Product